Reverse Dependencies of pyserial
The following projects have a declared dependency on pyserial:
- arduinopythonserialrpc — Python side of a serial communication library with Arduino Card
- arduinoserial2 — ArduinoSerial2: Connects Arudino with Computer
- arduplot — This tool listens the serial port and draws the data to matplotlib.
- ardupy-aip — ArduPy Integrated Platform
- arduPython — A Python interface for the Firmata procotol
- arduscope — Un osciloscopio basado en Arduino + Python y orientado a laboratorios de enseñanza
- arena-robot — Robot integration runtime for the ARENA
- arizon-usb-apiserver — Driver for Arizona USB Pressure Sensor
- asa-hmi-api — no summary
- asitiger — A thin Python interface for communicating with ASI Tiger Controllers
- assault-and-battery — A battery discharge curve calculator slash torture test.
- asyncserial — Asyncio wrapper for pyserial
- at89overlord — Arduino-based AT89C2051 programmer
- atcom — A tool which makes AT communication easier.
- atcommander — A simple AT Command tool
- atgsm — Python lib for AT GSM commands
- attila — Python module to communicate easily with modems and RF modules using AT commands
- ATWG — Arbitrary Temperature Waveform Generator for Climate Chambers
- aurorapy — Python implementation of Aurora Protocol
- auspex — Scientific measurement platform specifically geared towards superconducting qubit measurements.
- autolab-perception — Perception utilities for the Berkeley AutoLab
- automationkit — Automation Kit Test Framework
- autopilot-tools — PX4/ArduPilot autopilot tools
- aves — Acquisition, Visualization and Exploration Software
- avx — Library for controlling A/V devices
- AX3003P — Package for controlling AX-3003P Programmable DC Power Supply
- axaremote — Library to control AXA Remote window openers.
- AYABInterface — A Python library with the interface to the AYAB shield.
- bacorakel — BACorakel service.
- badgescale-ys-plt — A production line tool project
- bagpy — A python class to facilitate the reading of rosbag file based on semantic datatypes.
- basic-robotics — Basic Robotics Toolbox Developed in FASER Lab
- batlab — Low level library for communication with the Batlab V1.0 Battery Testing System by Lexcelon
- bbtkv2 — Code to control the BlackBox ToolKit v2 device for audio-visual timing checks
- bc125py — A Python-based interface for the Uniden BC125AT
- bdmc — An api wrapper lib designed for the uptech BDMC divers
- beaconscanner — Scan and decode ble data
- beam-controller — no summary
- bedsy — The BeDSy is a platform for hardware triggering and synchronisation of equipment for laboratory animal behavioural monitoring.
- belay — no summary
- bell-avr-libraries — Common Python libraries used by parts of Bell AVR
- benqprojector — Library to control BenQ projectors.
- beradio — BERadio is an encoding specification and implementation for efficient communication in constrained radio link environments. It is conceived and used for over-the-air communication within the Hiveeyes project.
- berkeley500A — API for Berkeley 500A delay generator
- binho — Python package for Binho USB host adapter products
- binho-host-adapter — Python Libraries for Binho Multi-Protocol USB Host Adapters
- BinhoSupernova — Python package for Binho Supernova USB host adapter
- bitalino — revolution-python-api
- bitctrl — Turn your microbit into a controller
- bk-precision-1900 — Control the BK Precision 1900 series power supplies
- bk7231tools — Tools to interact with and analyze artifacts for BK7231 MCUs
- bl60x-flash — Flash tool for Bouffalo Labs BL60x UART bootloader
- ble-serial — A package to connect BLE serial adapters
- bleuio — Library for using the bleuio dongle.
- bleuio-lib — Library for using the bleuio dongle.
- Bliss — BeamLine Instrumentation Support Software
- bloomy-fiu — Python driver package to communicate with the Bloomy Fault Insertion Unit over RS-485 Protocol
- bluebees — Bluetooth Mesh Config Tools
- bluerobotics-ping — A python module for the Blue Robotics ping-protocol and products
- bluetooth-2-usb — Convert a Raspberry Pi into a HID relay translating Bluetooth keyboard and mouse input to USB.
- bluing — An intelligence gathering tool for hacking Bluetooth
- bmstools — This package aims to provide open source tools for popular Battery Management Systems (BMS)
- bno055-usb-stick-py — BNO055 USB Stick Linux Python Driver
- BoatBuddy — A suite of tools to help collecting NMEA0183 and other marine metrics in a digital logbook format
- boilerio — A software thermostat and heating control system
- bondzai.gateway — Bondzai Gateway
- bonfo — Multiwii flight controller configuration management
- boofuzz — A fork and successor of the Sulley Fuzzing Framework
- bootloader — A tool for loading firmware onto Dephy devices.
- booty — Bootloader application
- bootycontrol — GUI for booty
- bot-controller — Package to easily control your DotBot and Sail Boat with different controllers.
- botblox — BotBlox Manager CLI tool
- bplsdk — An SDK for a more ergonomic use of the BPL protocol
- breadboard-curiouschip — Client library for Curious Chip Breadboard
- brewblox-ctl — Brewblox management tool
- brewflasher-cli — BrewFlasher Command Line Tool
- BrewPi — For the fans of the original Arduino temperature controller
- BrewPi-Remix — For the fans of the original Arduino temperature controller
- bric-arduino-controllers — Packages for controlling Arduino devices.
- brokkr — A client for data ingest/logging/uplink, remote management and autonomous and central control of scientific IoT sensors as part of the Mjolnir system.
- bronkhorst-propar — Communicate to Bronkhorst Instruments using the propar protocol over USB, RS232, or RS485.
- bronzebeard — Minimal ecosystem for bare-metal RISC-V development
- brother-label-printer — A library for creating and printing labels
- bsl — Real-time framework for online neuroscience research through LSL-compatible devices.
- buildhat — Build HAT Python library
- bumble — Bluetooth Stack for Apps, Emulation, Test and Experimentation
- bumpemu — A bump controller emulator on Raspberry Pi Zero W.
- Buoy-Base — Library for developing IoT service
- Buoy-Client — Scientific buoy - Multidevice
- buspyrate — BusPirate binary mode library
- busylight-for-humans — Control USB connected LED lights, like a human.
- byb2lsl — A driver to connect the Heart&Brain kit from Backyard Brain to the LabStreamingLayer.
- byte-triggers — Provides byte (0 to 255) triggers on serial/parallel ports and on LSL streams.
- c11204ps — Python package for controlling a Hamamatsu c11204-01/02 power supply.
- caenhv — An unofficial Python package 🐍📦 to interface with CAEN high voltage power supplies
- Calibrator-KS1200 — Package for calibrator dry block KS-1200-1
- callattendant — An automated call attendant and call blocker using a Raspberry Pi and USR-5637 modem
- camino — A library for controlling an Arduino from Python over Serial
- cancat — Multi-purpose tool for interacting with Controller Area Networks (CAN) and SAE J1939