Reverse Dependencies of pyserial
The following projects have a declared dependency on pyserial:
- kniteditor — An editor for knitwork.
- knitty-gritty — A tool for managing knitting machine patterns
- kobukidriver — A simple python driver for Kobuki mobile robot
- kuttyPy — Python package for KuttyPy and KuttyPyPlus AVR trainer
- labbench — The `labbench` module provides API tools to support python scripting for laboratory automation.The goal is to simplify the process of developing an experimental procedure into clear, concise, explainable, and reusable code.
- labcams — Multicamera video acquisition,online compression and automation
- labdevices — SDK for typical devices found in an atomic physics research lab.
- labelprinterkit — A library for creating and printing labels for Brother P-Touch devices
- LabExT-pkg — LabExT is a software environment for performing laboratory experiments on silicon-photonic devices.
- labphew — Fun with computer-controlled experiments for beginners
- labscript-devices — Device drivers for hardware controlled by the labscript suite
- lakeshore — A package to connect to and interact with Lake Shore instruments.
- lanforge-scripts — Automate LANforge devices
- larpix-control — Control the LArPix chip
- lasikservice — connects to a number of lasik boards and provides a service
- LaudaDriver — Simple helper to control the Lauda thermostat
- lcdbackpack — A wrapper library to facilitate writing text and commands to the Adafruit USB / Serial LCD Backpack
- lci-sim-app-device — Sim App Device package
- LDAQ — Data acquisition and generation with live visualization.
- leakagepro-com — python bindings for leakagePro communication
- lecore — Logic Elements core utilities
- ledfx — A network based light effect controller
- leds — leds is a pure python library for manipulating a wide variety of LED strip based displays, both in strip and matrix form.
- ledsc — Library for communicate with led string controller
- LEDSerialExpander — Expander Board Python Driver
- ledwall — A simple but powerful library to control WS2812b LED panel.
- lewansoul-lx16a — Driver to control LewanSoul LX-16A servos
- lewansoul-lx16a-terminal — GUI to configure and control LewanSoul LX-16A servos
- lgtv-rs232 — LG TV RS-232 client.
- lgtv-rs232-zcline91 — A small package for controlling my LG TV through its serial port
- libarc1 — Minimal interface library to ArC1
- libclsprot — Library for chipless Reader
- libdgus — no summary
- libFLIR — FLIR TAU Control Library
- libnxctrl — Python Library Emulating Nintendo Switch Controllers
- libstored — Embedded Debugger client for libstored's debug protocol
- lick-detector — no summary
- light-controller — This package aims to manage lights thanks to the FG-PDV400W-24-8T with an UART connection protocol
- lightcon — A set of APIs to Light Conversion devices
- lineproto — Python implementation of the LINE protocol
- linklabs-host-interface — Linklabs module interface
- linx-connection — Module for talking to Arduino by serial port
- lite-fastapi-local — A small example package
- litex.novitus — A Novitus Protocol Fiscal Printer Library
- litex.novitus-xml — A Novitus XML Protocol Fiscal Printer Library
- little-atf-programmer — Little ATF150x Programmer Board utility programs
- live-serial — Real-time serial port plotter/logger.
- llama-bsl — Script to communicate with Texas Instruments CC13xx/CC2538/CC26xx Serial Boot Loader (Fork of cc2538-bsl.py)
- locid — LOC.id python bindings
- lockhart-serial — Serial communication for Lockhart devices
- lora-modem — Python library for the Murata TypeABZ LoRaWAN modem
- lora-modem-abz — Python library for the Murata TypeABZ LoRaWAN modem
- lora-rn2483 — rn2483 library
- loramon — LoRa packet sniffer for RNode hardware
- LorenzTelegram — A library to communicate with Lorenz Messtechnik sensors
- lscom — list available active COM ports
- lupulo — Framework to build realtime web pages dedicated to monitor robots or IoT devices.
- lx16a — Python library to control the Hiwonder LX-16a digital serial servo motor.
- m1-8-writer — LED name badge writer.
- m3 — Support tools for chips from the M3 ecosystem
- magicpy — Toolbox to control MagVenture TMS stimulators
- magicrf — Library for UHF RFID Soc Reader Chip M100 and QM100
- MagneticReadoutProcessing — This library was created for the Low-Field MRI project and allows processing of data measured by magnetic field sensors. The focus is on visualization, followed by the provision of simple interfaces to work with this data. In general its possible to use this lib on all kinds of sensor data.
- MagPy-TMS — A Python toolbox for controlling Magstim TMS stimulators via serial communication
- MaixPy3 — MaixPy Python3 library
- makeblock — libraries for makeblock electronic platform
- makersign — The funniest joke in the world
- marlin-binary-protocol — Transfer files with Marlin 2.0 firmware using Marlin Binary Protocol Mark II
- mars-uartCmd — no summary
- martypy — Python library for Marty the Robot V1 and V2
- mates-controller — A Python Library developed to be used with Mates Studio Commander and Architect Environments
- matisse-controller — A Python package to control the Matisse 2 TS.
- MatSense — A toolkit for matrix sensor data processing 阵列传感器数据处理工具库
- mavcom — A python package that creates a simplified programming interface for controlling Mavlink-capable flight controllers
- mavcon — A python package that provides simplified drone flight control
- mavsniff — Mavsniff enables you to capture and replay MAVLink communication over serial line or network
- mavva — An extendable MAVLink framework working straight out-of-the-box. I use it, maybe you will too
- max-ble-hci — BLE HCI Test interface for controllers capable of the UART transport
- mbed-cli — Command line tool for interacting with Mbed OS projects
- mbed-os-tools — The tools to build, test, and work with Mbed OS
- mbed-tools — Command line interface for Mbed OS.
- mboot — Python module for communication with NXP MCU Bootloader
- mboot2 — Python tool and library for interacting with NXP MCUBoot devices.
- mbot2 — libraries for mbot2 platform
- mc2-symmetry — Symmetry - A cluster management system for micro-clusters
- mcbootflash — Flash firmware to devices running Microchip's 16-bit bootloader.
- mchplnet — python implementation of X2Cscope
- mcvqoe-base — Common code for MCV QoE Measurement Classes
- mdt69x — Package to communicate with Thorlab MDT69X Piezo controller
- mecode — Simple GCode generator
- mecompyapi — A Python API for the MeCom protocol by Meerstetter.
- meer-tec — MeCom for Python
- meerk40t — MeerK40t LaserCutter Software
- megacom — Alternative console-based UART client
- megapy — A Python package to control Arduino Mega over USB Serial
- melexis-i2c-stick — Melexis I2C Stick, python interface
- memfault-cli — Memfault CLI tool
- menlo-dds — Unofficial Python framework for communication with the Menlo DDS-120
- menlo-syncro — Unofficial Python framework for communication with the Menlo Syncro RRE laser synchronization unit
- meowbit — Lib for meowbit, build over ampy from adafruit